PRODUCTS
- CC 100 Amps Current Collector
- 125A Safetrack Current Collector
- Safetrack Current Collector Bracket
- 125 Amps Safeline DSL Busbar Current Collector
- 40 Amps Safetrack Current Collector
- Cast Iron DSL Busbar Current Collector
- 25 Amps Trolley Current Collector
- CC 250 Amps Current Collector
- 40 Amps Safetrack Current Collector
- 20 Amps Safetrack Current Collector
- Angle Iron Gravity Type DSL Busbar Current Collector
- Angle Iron DSL Busbar Current Collector with Insulator
- 250 Amps Safetrack Current Collector
- 70 Amps Trolley Current Collector
- 35 Amps Trolley Power Current Collector
- 60 Amps Safetrack Current Collector
- Armatic Busbar Current Collector
- CC 125 Amps Safeline Current Collector
- Safetrack SF1 Shrouded DSL Busbar
- SF1 Single Pole Safetrack DSL Busbar Hanger Clamp
- Safetrack SF2 Shrouded DSL Busbar
- Safetrack DSL Busbar Support Hanger Clamp
- SF1 Four Pole Safetrack DSL Busbar Hanger Clamp
- SF2 Four Pole Safetrack DSL Busbar Hanger Clamp
- SF2 Single Pole Safetrack DSL Busbar Hanger Clamp
- SF2 Three Pole Safetrack DSL Busbar Hanger Clamp
- Safetrack DSL Busbar Anchor Clamp
- Conductor Bar
- Copper Current Collector Shoe 125 Amps
- 250 Ampere Current Collector Copper Shoe
- DSL Support Web Bracket L Angle
- M type Safeline Conductor DSL Busbar Systems
- W type Safeline Insulated DSL Conductor Busbar
- V type Safeline Heavy Conductor DSL Bus Bar
- Safeline W Conductor Busbar Copper Bolted Joint
- Safeline W Single Pole DSL Busbar Hanger Clamp
- Safeline M Four Pole Busbar Hanger Clamp
- Safeline W Conductor Busbar Joint Cover
- Safeline W Conductor Busbar Steel Bolted Joint
- Safeline W Conductor Busbar Aluminium Bolted Joint
Emco Simplatroll Clutch Brake
14.128 Type Emco Simplatroll Electromagnetic Double Clutch
PRODUCT DETAILS :
| Brand | Emco Simplatroll |
| Torque Range | Torque from 7.5 Nm up to 480 Nm. |
| +91 9940429288, 8925066613, 9677125589 | |
| info@powermechengineering.com (Note: Quotation will be submitted on receipt of Email enquiry). | |
| Application: | Special purpose machines. |
| Note: | Price shall vary depending on Size,Torque,Voltage,and Model. |
| Country of Origin | Made in India |
POWERMECH supply 14.128 Type Emco Simplatroll Double Clutch (Clutch-Clutch) Combination. This unit is pre-assembled on a single shaft. It is incorporated in applications where variable speeds and reversing of drives are desired. These units also can be used when speed increase or decrease is required during operation without stopping the prime mover.
Features:
• Torque in 7.5 to 480 NM.
• Single Plate Dry Type
• Zero Backlash.
• Residual-Free.
• Fast Switching Times.
• High Operating Frequency.
• Compact Dimensions.
• Simple Construction.
• Long Life.
• Simple Wear Compensation Adjustment.
• Unique Pre-Stressed Spring.
• Slotted Wear Compensation Adjustment.
• Stationary Field (No Slip Rings).
• Coil with Class “F” Insulation.
• Consistent Operating Characteristics.
• Special Friction Material.
• Raw Materials to DIN Standards.
• Simple Installation.
• No Restriction on Mounting Positions.
• Low Inertia of Rotating Parts
• Maintenance-Free.
Application: Special purpose machines.
14.137 Type Emco Simplatroll Clutch Brake
PRODUCT DETAILS :
| Brand | EMCO SIMPLATROLL |
| Model Name/Number | 14.137 |
| Torque Range | Torque from 7.5 Nm up to 1250 Nm. |
| Design | 14.137 (Normally OFF & Open Type) |
| Usage/Application | Machine tools,Special purpose machines,Packaging machines,Conveyors,Welding machines. |
| Warranty | 1 Year for manufacturing defects only. |
| Note: | Price shall vary depending on Size,Torque,Voltage,and Model. |
| Suitable for: | Where space availability is critical and Dry Application only. |
| +91 9940429288, 8925066613, 9677125589 | |
| info@powermechengineering.com (Note: Quotation will be submitted on receipt of Email enquiry). | |
| Country of Origin | Made in India |
POWERMECH supply 14.137 Type Emco Simplatroll DC Electromagnetic (Normally OFF) Clutch Brake Combination. The armature arrangement is a duplex disc type on a common splined hub, which moves axially along the splined hub. These units are less expensive compared to Clutch Brake combination Type 14.800 / 14.125 as the combination is provided without the enclosure, shaft & bearings and can be incorporated where space availability is critical. These combinations are used for Dry Applications only.
Features:
• Torque in 7.5 to 2500 Nm.
• Zero Backlash.
• Fast Switching Times.
• High Operating Frequency
• Simple Construction.
• Long Life.
• Stationary Field (No Slip Rings).
• Coil with Class “F” Insulation.
• Simple Installation.
• No Restriction on Mounting Positions
• Single Plate Dry Type.
• Residual-Free.
• High Operating Reliability.
• Compact Dimensions.
• Maintenance-Free.
• Unique Pre-Stressed Spring.
• Consistent Operating Characteristics.
• Special Friction Material.
• Low Inertia of Rotating Parts.
Application: Machine tools, Special purpose machines, Packaging machines, Conveyors, Welding machines.
14.800 Type Emco Simplatroll Clutch Brake
PRODUCT DETAILS :
| Torque Range | From 7.5 Nm up to 2500 Nm. |
| Design | 14.800 Type,Design 1.1 and Other Designs |
| Brand | EMCO SIMPLATROLL |
| info@powermechengineering.com (Note: Quotation will be submitted on receipt of Email enquiry). | |
| +91 9940429288, 8925066613, 9677125589 | |
| Note: | Price shall vary depending on Design,Size,Torque,Voltage,and Model. |
| Applications: | Machine tools,Packaging machines,Welding machines,Conveyors,etc. |
| Country of Origin | Made in India |
14.800 Type Emco Simplatroll Electromagnetic Clutch-Brake Combination Unit is frequently used in switched mode systems with synchronous drive speeds. 14.800 Type Clutch-Brake turn a continuous motion at the input to intermittent motion at the output shaft in a torque range from 7.5 Nm up to 2500 Nm. Rapid acceleration and deceleration at constant motor speed is its unique feature. Available with patented wear compensation system makes it easy to maintain. The Clutch-Brake Combination Unit comes with foot or no foot configuration, B5 / B14 flange adapters at input side and output side with B5 flange. Clutch-Brake Combination Unit is also available with hollow or solid input and output shafts, using specially designed over excitation switching device, extremely high switching frequencies can be obtained. Zero backlash armatures are available upon request.
• Torque in 7.5 to 120 Nm.
• Five sizes from 7.5 to 120 Nm.
• Non asbestos friction linings.
• Patented air-gap adjustment from outside without dismantling the unit.
• Two axis heights available for each size.
• Rivet less low inertia armature.
• Coil with Class ‘F’ insulation.
• Dimensioning for 100% duty time.
• Totally enclosed design.
• Strong bearing design.
• Simple to fit.
• High operating reliability.
• Ready in assembled form.
• Fast switching times.
• Enclosure IP 44.
• Compact flange mounted designs available.
Applications: Machine tools, Packaging machines, Welding machines, Conveyors, etc.
14.121 Type Emco Simplatroll Clutch Brake
PRODUCT DETAILS :
| Torque Range | From 7.5 Nm up to 480 Nm |
| Design | 14.121 |
| Usage/Application | Machine tools,Special purpose machines,Packaging machines,Conveyors,Welding machines. |
| Brand/Make | Emco Simplatroll |
| +91 9940429288, 8925066613, 9677125589 | |
| info@powermechengineering.com (Note: Quotation will be submitted on receipt of Email enquiry). | |
| Country of Origin | Made in India |
POWERMECH supply 14.121 Type Emco Simplatroll DC Electromagnetic Clutch Brake Combination. This clutch brake combination unit which is a pre-assembled on a single shaft with torque ranges from 7.5 Nm up to 480 Nm. It resembles in functions like that of normal brakes and clutches and ready in assembled form with high operating frequency. This Unit is suitable for parallel shaft application and Not suitable for inline application.
Torque in 7.5 to 480 NM.
Single Plate Dry Type.
Zero Backlash.
Residual-Free.
Fast Switching Times.
High Operating Reliability.
High Operating Frequency.
Compact Dimensions.
Long Life.
Unique Pre-Stressed Spring.
Stationary Field (No Slip Rings).
Consistent Operating Characteristics.
Raw Materials to DIN Standards.
No Restriction on Mounting Positions.
Simple Wear Compensation Adjustment.
Coil with Class “F” Insulation.
Special Friction Material.
Special Installation.
Low Inertia of Rotating Parts.
Maintenance-Free.
Applications: Machine tools, Special purpose machines, Packaging machines, Conveyors, Welding machines.
14.125 Type Emco Simplatroll Clutch Brake
PRODUCT DETAILS :
| Voltage | 24 VDC or As per order |
| Brand | Emco Simplatroll |
| Model Name/Number | 14.125 |
| Torque Range | Torque: From 7.5 Nm up to 1250 Nm |
| Design | 14.125 Encased Body,Type Foot or Flange Mounted |
| Usage/Application | Machine tools,Packaging machines,Welding machines,Conveyors,etc. |
| +91 9940429288, 8925066613, 9677125589 | |
| Note: | Price shall vary depending on Size,Torque,Voltage,and Model. |
| Price | Price shall vary depending on Size,Torque,Voltage,and Model. |
| Country of Origin | Made in India |
EMCO SIMPLATROLL FOOT / FLANGE MOUNTED CLUTCH BRAKE COMBINATION Type 14.125
Type 14.125 Electromagnetic Clutch and Brake combination can be used for continuous start stop function in any drive transmission arrangement of any machine or mechanism. The standard unit comes with an input and output shaft which can be coupled with any other input and output shaft or other items.
Also, Flange mounted option for either input or output or both is available and hollow shaft instead of solid shaft in input or output or both is also available which facilitates an outside driving or driven shaft to be inserted inside the unit.
FEATURES:
• Torque in 7.5 to 1250 Nm.
• Simple to Fit.
• Ready inn Assembled Form
• Strong Bearing Design.
• Totally Encased Unit.
• Air Gap Adjustable Without Dismantling.
• Good Heat Dissipation
• High Operating Frequency.
• Long Life.
• Single Plate Dry Type.
• Slotted Armature for Torque Stability.
• Fast Switching Times.
• Coil with Class “F” Insulation.
• High Operating Reliability.
• Special Friction Disc
• Stationery Field (No. Slip Rings).
• Low Inertia of Rotating parts.
• Consistent Operating Characteristics.
Application: Machine tools, Special purpose machines, Packaging machines, Conveyors, Welding machines.
