PRODUCTS
- CC 100 Amps Current Collector
- 125A Safetrack Current Collector
- Safetrack Current Collector Bracket
- 125 Amps Safeline DSL Busbar Current Collector
- 40 Amps Safetrack Current Collector
- Cast Iron DSL Busbar Current Collector
- 25 Amps Trolley Current Collector
- CC 250 Amps Current Collector
- 40 Amps Safetrack Current Collector
- 20 Amps Safetrack Current Collector
- Angle Iron Gravity Type DSL Busbar Current Collector
- Angle Iron DSL Busbar Current Collector with Insulator
- 250 Amps Safetrack Current Collector
- 70 Amps Trolley Current Collector
- 35 Amps Trolley Power Current Collector
- 60 Amps Safetrack Current Collector
- Armatic Busbar Current Collector
- CC 125 Amps Safeline Current Collector
- Safetrack SF1 Shrouded DSL Busbar
- SF1 Single Pole Safetrack DSL Busbar Hanger Clamp
- Safetrack SF2 Shrouded DSL Busbar
- Safetrack DSL Busbar Support Hanger Clamp
- SF1 Four Pole Safetrack DSL Busbar Hanger Clamp
- SF2 Four Pole Safetrack DSL Busbar Hanger Clamp
- SF2 Single Pole Safetrack DSL Busbar Hanger Clamp
- SF2 Three Pole Safetrack DSL Busbar Hanger Clamp
- Safetrack DSL Busbar Anchor Clamp
- Conductor Bar
- Copper Current Collector Shoe 125 Amps
- 250 Ampere Current Collector Copper Shoe
- DSL Support Web Bracket L Angle
- M type Safeline Conductor DSL Busbar Systems
- W type Safeline Insulated DSL Conductor Busbar
- V type Safeline Heavy Conductor DSL Bus Bar
- Safeline W Conductor Busbar Copper Bolted Joint
- Safeline W Single Pole DSL Busbar Hanger Clamp
- Safeline M Four Pole Busbar Hanger Clamp
- Safeline W Conductor Busbar Joint Cover
- Safeline W Conductor Busbar Steel Bolted Joint
- Safeline W Conductor Busbar Aluminium Bolted Joint
Foot Switches
Powermech offers Safety foot switches for machines and plants. Safety foot switches are used as control swithces in machines and plants. Also, Foot switch allows the machine operator to perform other functions as his hands becomes free.
This safety foot switch is equipped with a shield to protect against accidental and unintentional actuation due to drop or unwanted trampling. In addtion, they are equipped with non-slip rubber feet and mechanical lock mounted in the pedal to prevent it from operating in the case the foot has not been fully positioned above the pedal.
All models of Safety foot swithces of Giovenzana, BCH, SOC, Speed-O-Control, CMK, Crane Kit are offered by Powermech to suit customer applications.
Model IP7009 Safety Foot Switches
Product Details:
| Minimum Order Quantity | 1 Piece |
|---|---|
| Size | Found in attached PDF Catalogue. |
| Usage/Application | Industrial |
| Brand | Giovenzana,Italy |
| Model Name/Number | IP7009 |
| Number Of Pedals | One |
| Color | PANTONE 102C (Commonly: Yellow and Black). |
| Operating Frequency | 50/60 Hz. |
| Weight | 1.4 Kg. |
| Country of Origin: | Italy |
| Number of Contacts | 1NO and also with 1NO+1NC in Model IP7009 |
| Contact type | Slow break double gap contacts |
| Series | Single Foot Switch with trigger mechanism. |
| Automation Versions | Foot switch without rest position trigger mechanism. |
| Comply with | IEC/EN60947-5-1 |
| Application/Usage | Packaging equipment,Material handling equipment,Scissor lift,Conveyers,Metalworking machine,etc |
| Price | Varies with model. For exact price,please email your requirement / enquiry. |
| Rated Thermal Current | 10 Amps |
| Rated Insulated Voltage | UI - 690 (Pollution Class 3) |
| info@powermechengineering.com (Note: Quotation will be submitted on receipt of Email enquiry). | |
| +91 9940429288, 8925066613, 9677125589 |
Powermech offers Safety foot switches for machines and plants. Safety foot switches are used as control swithces in machines and plants. Also, Foot switch allows the machine operator to perform other functions as his hands becomes free.
This safety foot switch is equipped with a shield to protect against accidental and unintentional actuation due to drop or unwanted trampling. In addtion, they are equipped with non-slip rubber feet and mechanical lock mounted in the pedal to prevent it from operating in the case the foot has not been fully positioned above the pedal.
Safety Foot Switch with Cover (Model: IP7009) is available is 1NO and 1NO+1NC with trigger mechanism requiring positive action to allow pedal operation.
Other Industrial Applications: CNC machines, Bending machine, Adhesive dispensers, Abrasive blasters, Packaging equipment, Conveyers, Material handling equipment, Man lifts, Communications equipment, Lighting, Engine brake, Alarms / Security, Emergency vehicles – Siren / Horn, Terminal applicators, Degreasers, Metalworking machines, Electric vehicles, Farm equipment, Engravers machinery, Scissor lifts, Riveting machinery, Soldering / Desoldering / UV Curing / Welding Equipment, etc.
NOTE: To receive price / quotation, Please email us your specification / name plate / existing material photos in case of replacment with your name, contact numbers, company name and location address.
Additional Information:
- Delivery Time: Immediate
- Packaging Details: Each Foot switch is packed individually.
BCH Heavy Duty Foot Switch
Product Details:
| Minimum Order Quantity | 1 Piece |
|---|---|
| Color | Silver-Grey Hammer tone backed enamel finish. |
| Frequency of operation | 2500 operations per hour. |
| Country of Origin | Made in India |
| Brand | BCH |
| Weight | 2 Kgs |
| Material/Body | Aluminium Die Cast |
| Application/Usage | Machine Tools, Rubber and Tyre making machines, , Special Purpose Machines, Welding Machines. |
| Mechanical & Electrical Life: | 10 million operations. |
| Enclosure for Contact block: | Oil tight and water tight enclosure. |
| Contact Blocks: | 1NO+1NC / 2NO+2NC / 4NO+4NC. |
| Price | shall vary for each model. |
| Model / Cat. No. | FSGX1, FSGX1L, FSGX2, FSGX2L, FSGY1, FSGY1L, FSGY2, FSGY2L, FSGZ1M, FSGZ2M. |
| +91 9940429288, 8925066613, 9677125589 |
Powermech supplies BCH Foot Switches which are designed to open and close either AC or DC pilot circuits. The Contact mechanism has single pole double throw twin break, silver contacts 1NO+1NC and double pole double throw 2NO+NC contacts and is completely enclosed in molded phenolic block. The Contact block or blocks are mounted in a watertight and oil tight enclosure. Smartly styled and compact enclosures have silver-gray hammertone backed enameled finish inside and outside. Three-point mounting bosses on the back of the treadle operated switches assures stable mounting on uneven surfaces.
BCH heavy duty foot switches are two position, or three position spring return, front treadle operated. Pressure on the treadle close the normally open contacts and release of the pressure returns the contact to original position. The lever assembly provides for adjustment of treadle travel to operate the contacts. When two contact blocks are supplied, adjustment of the lever assembly provides for simultaneous or differential tripping (second stage operation) of the contact blocks. The contact assembly (a precision limit switch) is fastened to the bottom of the case with the terminals up for easy wiring.
Treadle latches when supplied permit spring return or maintained contacts operations. The latch release pedal provides easy-on-the-job conversion from maintained contact to spring return. Conversion to spring returns requires only a push down and forward motion on the latch release pedal to make the treadle latch inoperative. The latch release pedal is normally located on the right-hand side, it can be converted in the flied to left hand extension.
The watertight and oiltight enclosure has a cast cover and treadle. A gasket between case and cover and a friction type seal on the treadle shaft assures watertight and oiltight performances.
The earthing screws provided in the enclosure allow a convenient means of attaching earth-wire if required. A safety spring within the enclosure assures treadle spring return in case the main return spring under the treadle gets damaged. All Switches with second stage operation are provided either with light or medium or heavy spring. The heavy second stage feel spring are not recommended for switches with treadle latches.
Two Covers are available as standard guard and shield. The selection of the cover depends on the degree of protection desired, to prevent accidental treadle operation.
Model IP7006I Safety Single Foot Switch
Product Details:
| Minimum Order Quantity | 1 Piece |
|---|---|
| Brand | Giovenzana,Italy |
| Material | Thermoplastic |
| Number Of Pedals | One |
| Color | Red and Black |
| Usage/Application | Packaging equipment, Material handling equipment, Scissor lift, Conveyers, Metalworking machine, etc |
| Product Code No | IP 7006I |
| Size | Found in attached PDF Catalogue. |
| Comply with | IEC/EN60947-5-1 |
| Rated insulation voltage Ui | 690 V (pollution class 3) |
| +91 9940429288, 8925066613, 9677125589 | |
| info@powermechengineering.com (Note: Quotation will be submitted on receipt of Email enquiry). | |
| Country of Source | Italy |
SINGLE FOOT SWITCHES SERIES, Model: IP7006I
The foot switches are used to start and stop operations and production processes on machinery and plants, where manual operation is impossible. Different foot switches versions are available depending on the ambient conditions and the mechanical behaviour. Applications include use on packaging machines, storage, and transport technology as well as on textile machines.
The safety foot switches in thermoplastic material are equipped with a shield to protect against accidental and unintentional actuation due to tool drop or unwanted trampling. In addition they are equipped with non-slip rubber feet and mechanical lock mounted in the pedal to prevent it from operating in the case the foot has not been fully positioned above the pedal.
The version without blocking and without foot protection cap is preferred when the main function is to stop the machine.
The electric foot switches can be equipped with a mushroom button as an emergency to interrupt the circuit even in the case of a actuated pedal. The electric contact exchange occurs when the pedal is completely lowered. The protection degree for single foot switches is IP65, while for double and with emergency mushroom is IP54. All foot switches are compliant with the Machinery Directive and are CE-marked.
Other Industrial Applications: CNC machines, Bending machine, Adhesive dispensers, Abrasive blasters, Packaging equipment, Conveyers, Material handling equipment, Man lifts, Communications equipment, Lighting, Engine brake, Alarms / Security, Emergency vehicles – Siren / Horn, Terminal applicators, Degreasers, Metalworking machines, Electric vehicles, Farm equipment, Engravers machinery, Scissor lifts, Riveting machinery, Soldering / Desoldering / UV Curing / Welding Equipment, etc.
- Delivery Time: Immediate
